| Place Of Origin | India |
| Brand | VANI |
| Type | ASTM A307 |
| Grade | A307 Grade A & B |
| Head Type | Hexagonal |
| Standard | ASTM A307, ASTM A563 |
| Thread Type | Half Thread |
| Rust Resistant | Yes |
| Threaded | Yes |
| Corrosion Resistance | Yes |
| Packaging Type | Bags/Boxes |
| Surface Treatment | Galvanized |
| I Deal In | New Only |
| Size | 1/4" To 1-1/2" |
| Material | Mild Steel |
VANI IMPEX is one of the leading Fasteners manufacturers & Suppliers in ASTM A307 GRADE A & B.
ASTM A307 specification covers carbon steel bolts and studs ranging from 1/4" through 4" diameter. This is your everyday, run of the mill bolt specification often manufactured using A36 round bar. There are three grades A, B, and C* which denote tensile strength, configuration, and application. Refer to the Mechanical Properties Chart for the subtle strength differences within each grade.
| A | Headed bolts, threaded rods and bent bolts intended for general applications. |
|---|---|
| B | Heavy hex bolts and studs intended for flanged joints in piping systems with cast iron flanges. |
| C* | Non headed anchor bolts, either bent or straight, intended for structural anchorage purposes. The end of a grade C anchor bolt intended to project from the concrete will be painted green for identification purposes. Permanent marking is a supplemental requirement. s |
| Grade | Tensile, ksi | Yield, min, ksi | Elong %, min |
| A | 60 min |
|
18 |
| B | 60 - 100 |
|
18 |
| C* | 58 - 80 | 36 | 23 |
| Element | Grade A | Grade B |
| Carbon, max | 0.29% | 0.29% |
| Manganese, max | 1.20% | 1.20% |
| Phosphorus, max | 0.04% | 0.04% |
| Sulfur, max | 0.15% | 0.05% |
Price: